用于甲烷分解和甲烷二氧化炭重整的碳材料催化剂研究进展

The decomposition and CO2 reforming of methane,respectively,are promising alternatives to industrial steam methane reforming. In recent years,research has been focused on the development of catalysts that can operate without getting deactivated by carbon deposition,where,in particular,carbon catalysts have shown positive results. In this work,the role of carbon materials in heterogeneous catalysis is assessed and publications on methane decomposition and CO2 reforming of methane over carbon materials are reviewed. The influence of textural properties(BET surface area and micropore volume,etc.) and oxygen surface groups on the catalytic activity of carbon materials are discussed. In addition,this review examines how activated carbon and carbon black catalysts,which are the most commonly used carbon catalysts,are deactivated. Characteristics of the carbon deposits from methane are discussed and the influence of the reactivity to CO2 of fresh carbon and carbonaceous deposits for high and steady conversion during CO2 reforming of CH4 are also considered.     

直接内重整熔融碳酸盐燃料电池中甲烷蒸汽重整催化剂探索性研究

选择甲烷蒸汽重整催化剂用于直接内重整熔融碳酸盐燃料电池(DIR-MCFC)中,并考察了DIR-MCFC的性能,讨论了电池放电量、气体压力、燃料气进料水/碳比(S/C)等因素对该催化剂性能的影响.结果表明,重整催化剂能够满足电池放电需求;放电量大小影响电池内的H2含量,但对CH4含量影响不大;当气体压力为0.36MPa时...     

常压高频放电等离子体炬改进制备CO2/CH4重整用Ni/MgO催化剂

比较了常规法、等离子体炬法和等离子体炬辅助焙烧法制得的Ni/MgO催化剂上CO2/CH4重整反应性能差异,并利用X射线衍射、透射电镜、X射线光电子能谱和CO2程序升温表面反应等技术对反应前后催化剂进行了表征,结果表明,采用等离子体炬辅助焙烧法制备的催化剂上Ni晶粒粒径小,分散度较高,低温活性和抗积炭性能较高;在常压,7...     

非水溶剂溶胶-凝胶法制备的纳米卤氧化镧在甲烷氧化偶联反应中的应用

采用非水溶剂溶胶-凝胶法制备了具有四方晶体相结构的纳米LaOX(X=Cl,Br).X射线粉末衍射和扫描电子显微镜结果表明,纳米LaOX样品的形貌规整、粒径均匀(平均粒径约为47nm).在甲烷氧化偶联(OCM)反应中,纳米LaOX显示出比常规尺度LaOX更高的催化活性和C2选择性,且纳米LaOX具有良好的稳定性.此外,常...     

等离子体与催化剂协同催化CH4选择性还原脱硝反应

研究了在低温等离子体和催化剂共同作用下,CH4选择催化还原(SCR)NO的反应.在所考察的金属氧化物催化剂中,γ-Al2O3表现出最高的催化活性.当等离子体放电功率为4.5 W,反应温度为300℃时,NO转化率为56.5％;该条件下单纯等离子体反应和以γ-Al2O3为催化剂时NO转化率分别为28.9％和0,表明等离子体...     

介孔Al2O3负载PdO催化甲烷燃烧反应性能

采用浸渍法制备了介孔Al2O3(M-Al2O3)负载PdO催化剂,考察了其催化CH4燃烧反应性能.结果表明,以M-Al2O3为载体的PdO催化剂活性比普通Al2O3载体高得多,这很可能与M-Al2O3的孔道结构对PdO物种的限域作用有关.随着PdO/M-Al2O3催化剂焙烧温度的升高,甲烷催化燃烧活性先增加后降低,其中700oC焙烧的催化剂活性最高,400oC反应时CH4转化率为91%.此时Pd物种主要以PdO颗粒形式高度分散在载体的介孔孔道内,而高温焙烧时,Pd物种主要以Pd和PdO的混合晶相存在.尽管900oC焙烧制得的催化剂上CH4的转化率降低,但TOF值最大,这可能与该催化剂中同时存在金属Pd和PdO有关.     

CH4, CO2和H2O在非金属原子修饰石墨烯表面的吸附

煤层气(矿井瓦斯)是一种有望替代传统化石燃料,如煤、石油和天然气的非常规气体. 作为可得的清洁能源,它的利用被认为是节能和经济的选择. 在本工作中,非金属原子X(X=H,O,N,S,P,Si,F,Cl)修饰的石墨烯(Gr)被用来代表具有结构异性的煤表面模型. 通过密度泛函理论系统地研究了煤层气组分Y(Y=CH₄,CO₂,H₂O)在非金属原子修饰石墨烯上的吸附作用. 结果表明Y在非金属原子修饰石墨烯上的吸附均为物理吸附. 态密度和差分电荷密度共同表明了这种弱的相互作用.其中,H和Cl对CH₄的作用较大; N、O、F、Cl对CO₂的作用较强; N,Cl对H₂O的影响不容忽视. 总的来说,吸附能大小依次为：H₂O>CO₂>CH₄. 因此,在CH₄富集的煤层里注入H₂O或CO₂可以与CH₄形成竞争吸附,进而提高煤层气采收率. 本工作提供了在分子水平下煤层气与非金属原子修饰石墨烯之间的相互作用的详情,并为煤层瓦斯的开采与分离提供了有用的信息.     

Chemical behavior of ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands in the presence of palladium(II) chloride

The synthesis, structural characterization, and coordination behavior of ditopic ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands (ortho-(OH)₂C₆H₃-4-CHpz₂, ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂, and ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂) with pyrazole, 3-phenylpyrazole, and 3-tert-butylpyrazole as donors are described. The reaction of a soluble PdCl₂-source with ortho-(OH)₂C₆H₃-4-CHpz₂ in acetonitrile yielded the related square-planar N,N-coordinated Pd(II) dichloride complex, whereas treatment of ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂ or ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂ with PdCl₂ in acetonitrile resulted in degradation of these ligands. The Pd(II) complexes trans-(3-PhpzH)₂PdCl₂ and trans-(3-tBupzH)₂PdCl₂ were isolated and fully characterized including X-ray diffraction analyses.     

Reactivity of bis(pyrazol-1-yl)methanes functionalized by 2-hydroxyphenyl and 2-methoxyphenyl on the methine carbon atom with W(CO)5THF

Reactions of 2-hydroxyphenyl and 2-methoxyphenylbis(pyrazol-1-yl)methanes as well as 2-hydroxyphenyl and 2-methoxyphenylbis(3,5-dimethylpyrazol-1-yl)methanes with W(CO)₅THF have been carried out. Heating 2-hydroxyphenylbis(pyrazol-1-yl)methane (L¹) with W(CO)₅THF in THF at reflux yielded complex (L¹)W(CO)₄.L¹, while similar reaction of 2-hydroxyphenylbis(3,5-dimethylpyrazol-1-yl)methane (L²) with W(CO)₅THF resulted in the cleavage of a C_sp3-N bond to generate 1,2-bis(2-hydroxyphenyl)-1,2-bis(3,5-dimethylpyrazol-1-yl)ethane (L) and pyrazole derivative W(CO)₅(3,5-Me₂PzH) (Pz = pyrazol-1-yl). These two fragments were connected together through strong O…H-N and O-H…N hydrogen bonds to form complex L.[W(CO)₅(3,5-Me₂PzH)]₂. The analogous results were observed in the treatment of 2-methoxyphenylbis(pyrazol-1-yl)methane (L³) with W(CO)₅THF, which gave product L′.[W(CO)₅(PzH)]₂ (L′ = 1,2-bis(2-methoxyphenyl)-1,2-bis(pyrazol-1-yl)ethane) as well as certain amount of complex (L³)W(CO)₄. In addition, during the reaction of 2-methoxyphenylbis(3,5-dimethylpyrazol-1-yl)methane (L⁴) with W(CO)₅THF, partial decomposition reactions took place to yield complexes (L⁴)W(CO)₄ and W(CO)₅(3,5-Me₂PzH), but no hydrogen bond was found between these two moieties.     

Kinetic study of oxidative coupling of methane over Mn and/or W promoted Na_2SO_4/SiO_2 catalysts

A comprehensive kinetic model for oxidative coupling of methane(OCM)over Mn and/or W promoted Na2SO4/SiO2 catalysts was developed based on a micro-catalytic reactor data.The methane conversion and ethylene,ethane,carbon monoxide and carbon dioxide selectivities were obtained in a wide operating condition range of 750 - 825-C,CH4/O2=2.5 - 10 and contact time=267 - 472 kg s m-3.Reaction networks of six models with different rate equation types were compared together.The kinetic rate parameters of each reaction network were estimated using linear regression or genetic algorithm optimization method(GA).A reaction network suggested by Stansch et al.for OCM was found to be the best one and was further used in this work.The suggested model could predict the experimental results of OCM reaction within a deviation range of ± 20%.